Lump Breakers & Crushers
Gladiator

The Gladiator is a lump breaker designed for demanding size reduction and grinding applications—and for 24-hour operation. Available in low or high speeds from 7.5 HP to 30 HP, the Gladiator Lump Breaker can handle particle sizes from several inches to 100 microns. Built with abrasion-resistant parts, the Gladiator will deliver.

  • Carbon steel construction
  • Replaceable half-inch thick carbon steel over-tip-hook rotor blades
  • Carbon steel wear liners
  • Emergency stop protection
  • Rotor Shaft with provisions for air purge, lip seals and oil bath

Download Brochure >>

  • Four-bolt tapered roller bearings
  • Gravity bottom discharge
  • V-belt or direct-coupled drive
  • Easy-to-assemble rotors
  • Stainless steel contact points
  • Discharge screen for particle size control
  • Electronic shear pin for jam protection

Specifications and Dimensions

U.S. Metric
Model/SpeedCapacity TPHParticle SizeHP
500 x 500 Low20-251/2 to 1 in7.5-10 (4 pole) motor
500 x 500 High40-6080-90% < 3/8 in10-20 (6 pole) motor per shaft
550 x 700 Low25-401/2 to 1 in7.5-15 (4 pole) motor
550 x 700 High60-9080-90% < 3/8 in10-25 (6 pole) motor per shaft
740 x 700 High90-12080-90% < 3/8 inUp to 30 (6 pole) motor per shaft
740 x 1225 High150-22580-90% < 3/8 inUp to 30 (6 pole) motor per shaft
965 x 700 High120-18080-90% < 3/8 inUp to 30 (6 pole) motor per shaft
965 x 1225 High200-30080-90% < 3/8 inUp to 30 (6 pole) motor per shaft


Request a Test

See for yourself what our equipment can do. Send us a sample and we'll provide a detailed analysis of the recommended equipment specifications and horsepower requirements.

Visit Test Center »